DDM100SCR3 DIN-rail Energy Meter With Communication Port, 7 Pole/Modular 

DDM100SCR3 DIN-rail Energy Meter with Communication Port,7 Pole/Modular

Main Features

1.  Our
DIN-railenergy meter with communication port (7 pole/modular) uses 35mm standard DIN rail installation or front board setting.  It complies with standard DIN EN50022.  The front boardsetting (mounting holes center distance is 63 mm)is also available.
2.  It has a width ofseven poles.
3.  TheLCD 6 1 digits display (999999.1kWh) is equipped.  5 2 digits display may also beselected (please specify when ordering). It can bearbitrarily set by users via port of RS485 communication.

4.  There is a polarity port of passivepulse output which is close and a non-polarity port of passive pulse outputwhich is distant in this
DIN-rail energy meter with communication port.  It can be conveniently connected with all kind of AMR systems.  It complies with standard IEC 62053-31 andDIN 43864.
5.  The LED canindicate power supply state, signal of energy impulse,as well as communication state.
6.  There is a port of RS485 communication in thisDIN-rail energy meter with communication port.  Thestandard configuration communication agreement complies withstandard DL/T645-1997.
7.  Thestandard configuration doesn’t detect thedirection of the flow of load current.  This function is optional.  Detectedinformation can be displayed by an individual LED.
8.  The DDM100SCR3 DIN-rail energy meterwith communication port measures single phase three wire active power consumption.  It has nothing to dowith direction of flow of load current.  Itcomplies with standard IEC62053-21 and IEC62052-11.
9.  This
DIN-rail energy meter with communicationport usesdirect connect operation or through CT or PT and CT.

Optional Functions

1.  Thestandard configuration of this
DIN-rail energy meter with communicationport uses LCD display without backlighting.  If preferred, LCD displaywith white backlighting can be also selected.  There is a maintenance-free batterywhich can be used for display when the power iscut off.
2. Multi-tariff is available (optional TOU or step tariff).

Applications
Our DIN-rail energy meter with communicationport is used to measure 50Hz or 60Hz active energy consumption from single phase three wire AC electricity net.
It features small size and DIN-rail mounting,makingit suitable for installation in distribution boards and small standard enclosures.
This DIN-rail energy meter with communication port is used inoffice buildings, shopping centers, apartments, airports,metros, etc.
For convenient meter-reading, the energy meter has aRS485 communication module.

Technical Specifications

Accuracy Class

Class 1.0

Rated Voltage

110VAC, 120VAC, 220VAC, 230VAC, 240VAC, etc.

Operation Voltage Range

0.7Un-1.3Un

Insulation Capability

AC voltage can withstand 2kV/4kV for 1 minute. Impulse voltage can withstand 6kV-1.2/50 μs waveform.

Rated Frequency

50Hz or 60Hz

Rated Current (A)

1.5(6)A, 5(30)A, 5(60)A, 10(40)A, 10(60)A, 20(80)A, 30(100)A, etc.

Operational Current Range

0.05Ib~ I max (Direct), 0.02Ib~ I max (with CT)

Starting Current

0.004Ib (Direct), 0.002Ib (with CT)

Power Consumption

Voltage Circuit ≤1.0W 5VA, Current Circuit ≤1VA(Ib)

Temperature Range

Max. operation temperature -40ºC-- 80ºC

Max. storage temperature -45ºC-- 85ºC

Relative Humidity

≤85%

RS 485 Communication

Baud rate: 1200bps (default)

Remote Pulse Output

Pulse width: 80ms ± 20ms

Infrared Communication (Optional)

Communication distance: ≥4m

Communication angle: ≥±15o

Service Life

More than 10 years

Dimension

125mmx 88mm x 73mm

Weight

Approx 650g

Please advise us if you need any differentspecifications, we can manufacture special energy meters according to yourspecial requirements.

HUABANG is a
DIN-railenergy meter with communication port (7 pole/modular) manufacturer, based in China.  We offer DIN-rail energy meter with communicationport (7 pole/modular), electronic energy meter,mechanical energy meter, socket energy meter, etc.  We provide high quality energy meters at acompetitive price.  The full chain formanufacturing energy meters can be completed in China, even in one city.  Our low manufacturing cost saves yourpurchasing cost.  Further details of eachproduct are shown in the specific product page.

Productos relacionados
Comentarios
Otros productos
Novedades
Otros productos
Vídeos
Enviar mensaje
Enviar mensaje