DDM100SCIR DIN-rail Energy Meter With Infrared Communication Port , 4 Pole/Modular
DDM100SCIR DIN-rail Energy Meter With
Main Features
1. Our DIN-rail energy meter with infraredcommunication port (4 pole/modular) uses
2. It has a width of four-poles.
3. The DDM100SCIR
4. There is a polarity port of pulseoutput passive which is close and a non-polarity port of pulse output passivewhich distant in this DIN-rail energy meter with infrared communication port
5. Three LED indicate power supplystate, signal of energy impulse, alarm, direction of flow of load current, farinfrared and communication state.
6. It has a port of far infrared datacommunication and a
7. Standard configuration doesn't detect direction offlow of load current. But this function can bechosen. Detected data is indicated by an individual LED.
8. This DIN-rail energy meter with infraredcommunication port measures single phase two wire active power consumption. It has nothing to do with direction offlow of load current. Itcomplies with standard IEC62053-21 and IEC62052-11.
9. It usesdirect connecting operation or through CT or PT and CT.
10. Thestandard configuration of the DDM100SCIR series
11. Ananti-tampering function is available.
12. Thestandard configuration usesLCD display without backlighting. LCD display with white backlightingmay also be selected. Amaintenance-free battery isused for display when the power is shut off.
Applications
This DIN-rail energymeter with infrared communication port is used to measure 50Hz or 60Hz active energy consumption from single phase two wire AC electricity net.
The small size and DIN-rail mounting makes it suitable for installation in distribution boards and small standard enclosures.
It is used in office buildings, shopping centers, hotels, airports, metros, etc.
For convenient meter-reading, it is equipped with afar infrared and a RS485 communication module.
Technical Specifications
Accuracy Class | Class 1.0 |
Rated Voltage | 110VAC, 120VAC, 220VAC, 230VAC, 240VAC, etc |
Operation Voltage Range | 0.7Un-1.3Un |
Insulation Capabilities | AC voltage can withstand 2kV for 1 minute. Impulse voltage can withstand 6kV-1.2/50 μs waveform. |
Rated Frequency | 50Hz or 60Hz |
Rated Current | 1.5(6)A, 5(30)A, 5(60)A, 10(40)A, 10(60)A, 20(80)A, 30(100)A, etc. |
Operational Current Range | 0.05Ib~ I max (Direct), 0.02Ib~ I max (with CT) |
Starting Current | 0.004Ib (Direct), 0.002Ib(With CT) |
Power Consumption | Voltage Circuit ≤1.0W 5VA, Current Circuit ≤1VA(Ib) |
Running with No-Load | It uses logic design to anti-running. |
Temperature Range | Max. operation temperature -40ºC-- 80ºC; Max. storage temperature -45ºC-- 85ºC |
Relative Humidity | ≤85% |
RS 485 Communication | Baud rate: 1200bps (default) |
Remote Pulse Output | Pulse width: 80ms ± 20ms |
Infrared Communication | Communication distance: ≥4m, Communication angle: 15o |
Service Life | More than 10 years |
Dimension | 75mm x 88mm x 73mm |
Weight | Approx 320g |