Nonwaterproof LED Light Strip

Technical advantages
1. The base of the flexible LED light strip is flat and flexible, so the LED strip can be created into variety of shapes.
2. Featuring small size and low voltage operation, the LED flexible strip is ideal for a wide range of applications.
3. With the same power, the LED strip is typically twice as bright as LED rope light.
4. The nonwaterproof LED light strip can be cut to size by at marked intervals by electricians and rejoined by soldering or using our quick connectors at marked soldering points.
5. Comes with a self-adhesive 3M backing that allows quick and easy installation on any dry, smooth surface.

Note
Always install according to local electrical codes requirements. 

Why choose it?
1. Available in 12 or 24 volts.
2. This nonwaterproof LED light strip adopts super bright SMD LEDs as light source, which ensures good color consistency. Small and powerful LED!
3. Customized CCT LED is available.
4. Little or no heat generation, low power consumption.
5. The same as other Rayconn LED lights, the LED strip light comes with a long lifespan of 30,000 hours or more.
6. The length of the LED light strip is adjustable.
7. Solid-state, high vibration resistant SMD chips.
8. Dimmable.
9. Three years warranty time!
10. CE, RoHS certified.

Applications
Rayconn nonwaterproof LED light strip can be used as a type of decorative lighting fixture for cove lighting and back lighting at homes and in hotels, stores, yachts, bars, automobiles, etc. It can also be applied for general illumination in any places for the purpose of saving energy consumption. Moreover, LED strips can also be used for guidance lighting for cinemas, theatres, yachts, trains to guide people move around safely as well as channel letter lighting for your stores, restaurants, bars, etc.  

International markets
Germany, UK, Spain, France, Italy, Austria, Switzerland, Belgium, The Netherlands, Greece, Sweden, Norway, Denmark, Portugal, United States, Canada, Australia, Brazil, South Africa, etc.

Safety and maintenance information
1. The installation of Rayconn flexible LED light strip should be conducted by qualified technicians, and specific electrical and safety standards need to be followed.
2. All applicable electrical and safety standards should be considered while installing the LED strip or related parts like power supply, LED controller, etc.
3. While installing, attention should be paid to standard ESD precautions. It is advised to use a wrist strap during soldering to remove any static electricity. Static electricity may damage the LEDs and other flex LED light strip components.
4. The conducting paths on the flexible PC board should not be damaged during assembly. The LED strip light and all light components should not be mechanically stressed. The strip may be curved around small radii provided there are no LED components on the bend and the force does not crease the light strip. The strip should be secured down immediately to avoid fatigue and breakage.
5. The flexible LED ribbon should be connected to proper power supply.
6. During installation, please make sure the polarity id correct. Electrical polarity is printed on the LED strip and wrong polarity connection may cause damages to the LED light.
7. The LED strip can be cut to different lengths to meet different installation demands. While cutting, please cut according to the cutting marks printed on the strip light.
8. Soldering connection should only be performed on designated solder pads on the flexible LED light strip. During soldering, do not exceed the maximum soldering temperature of 260 Celsius degrees and the maximum soldering time of 10 seconds.
9. When mounting on metallic or other conductive surfaces, there should be an electrical isolation point between the strip and the mounting surface.
10. Flex LED light strip should be installed in proper environment. It’s the user’s responsibility to provide the LED ribbon with suitable protection against corrosive agents, such as moisture and condensation and other harmful elements.